Warning!

--- a/debian/changelog	Fri Sep 28 23:04:49 2007 +0200
+++ b/debian/changelog	Sat Sep 29 11:42:47 2007 +0200
@@ -1,8 +1,13 @@ grml-live (0.0.3) unstable; urgency=low
 grml-live (0.0.3) unstable; urgency=low
 
-  * Make sure $SECONDS is set.
+  * Support for setting GRML_NAME (like grml vs. grml-small
+    vs grml64 vs...)
+  * Drop the character limits of $VERSION and $RELEASENAME.
+  * Make sure $SECONDS is set before outputting the runtime.
+  * Unify usage of i386_files, place all template files in
+    directory templates now.
 
- -- Michael Prokop <mika@grml.org>  Fri, 28 Sep 2007 23:04:24 +0200
+ -- Michael Prokop <mika@grml.org>  Sat, 29 Sep 2007 11:40:22 +0200
 
 grml-live (0.0.2) unstable; urgency=low
 

--- a/debian/overrides	Fri Sep 28 23:04:49 2007 +0200
+++ b/debian/overrides	Sat Sep 29 11:42:47 2007 +0200
@@ -1,4 +1,5 @@ grml-live: executable-not-elf-or-script 
-grml-live: executable-not-elf-or-script ./usr/share/grml-live/windows/autostart/autorun.pif
-grml-live: executable-not-elf-or-script ./usr/share/grml-live/windows/autostart/autorun.bat
-grml-live: executable-not-elf-or-script ./usr/share/grml-live/windows/autostart/autorun.inf
+grml-live: extra-license-file usr/share/grml-live/templates/GRML/LICENSE.txt
+grml-live: executable-not-elf-or-script ./usr/share/grml-live/templates/windows/autostart/autorun.pif
+grml-live: executable-not-elf-or-script ./usr/share/grml-live/templates/windows/autostart/autorun.inf
+grml-live: executable-not-elf-or-script ./usr/share/grml-live/templates/windows/autostart/autorun.bat
 grml-live: unknown-section grml

--- a/debian/rules	Fri Sep 28 23:04:49 2007 +0200
+++ b/debian/rules	Sat Sep 29 11:42:47 2007 +0200
@@ -36,8 +36,7 @@ install: build
 	# Add here commands to install the package into debian/grml-live.
 	cp -a etc         debian/grml-live/
 	cp -a examples    debian/grml-live/usr/share/doc/grml-live/
-	cp -a i386_files debian/grml-live/usr/share/grml-live/
-	cp -a windows     debian/grml-live/usr/share/grml-live/
+	cp -a templates   debian/grml-live/usr/share/grml-live/
 	install -o root -m 755 grml-live debian/grml-live/usr/sbin/grml-live
 
 # Build architecture-independent files here.

--- a/docs/grml-live.txt	Fri Sep 28 23:04:49 2007 +0200
+++ b/docs/grml-live.txt	Sat Sep 29 11:42:47 2007 +0200
@@ -10,8 +10,8 @@ Synopsis
 Synopsis
 --------
 
-grml-live [-c <classe[s]>] [-i <iso_name> ] [-r <release_name>]
-[-s <suite>] [-t <target_directory>] [-v <version_number>] [-Fvh]
+grml-live [-c <classe[s]>] [-g <grml_name>] [-i <iso_name> ] [-r <release_name>]
+[-s <suite>] [-t <target_directory>] [-v <version_number>] [-FVh]
 
 *******************************************************************************
 Important! This document is growing as requested. If you have questions which
@@ -62,6 +62,10 @@ the classes GRMLBASE and I386 are assume
 
 Force execution and do not prompt for acknowledgment of configuration.
 
+  -g **GRML_NAME**::
+
+Set the grml flavour name. Common usage examples: grml, grml-small, grml64.
+
   -h::
 
 Display short usage information and exit.
@@ -73,8 +77,7 @@ by default.
 
   -r **RELEASENAME**::
 
-Specify name of the release. (Notice: the output of the release name is limited
-to 30 characters.)
+Specify name of the release.
 
   -s **SUITE**::
 
@@ -91,9 +94,7 @@ chroot system) and grml_isos (where the 
 
   -v **VERSION_NUMBER**::
 
-Specify version number of the release. (Notice: the output of the version number
-is limited to 5 characters. So "1.0-1" is fine, but "1.0.0.1" will be stripped
-to "1.0.0" then.)
+Specify version number of the release.
 
   -V::
 

--- a/etc/grml/grml-live.conf	Fri Sep 28 23:04:49 2007 +0200
+++ b/etc/grml/grml-live.conf	Sat Sep 29 11:42:47 2007 +0200
@@ -3,7 +3,7 @@
 # Authors:       grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
 # Bug-Reports:   see http://grml.org/bugs/
 # License:       This file is licensed under the GPL v2 or any later version.
-# Latest change: Tue Sep 18 22:27:31 CEST 2007 [mika]
+# Latest change: Sat Sep 29 10:46:18 CEST 2007 [mika]
 ################################################################################
 
 # Main output directory
@@ -27,6 +27,11 @@ ISO_TARGET="$TARGET/grml_isos"
 # Notice: GRMLBASE is recommended in any case unless you *really*
 # know what you are doing; class I386 provides the kernel for x86
 CLASSES="GRMLBASE,I386"
+
+# Which grml name do you want to use?
+# Common usage examples: grml, grml-small, grml64,...
+# Default: 'grml'
+# GRML_NAME="grml"
 
 ## Which mirrors do you want to use? Please set GRML_LIVE_SOURCES *and*
 ## *FAI_DEBOOTSTRAP* accordingly. To use a local directory (like an NFS mount)
@@ -57,10 +62,10 @@ CLASSES="GRMLBASE,I386"
 # ... and the sources.list entry for the directory:
 # MIRROR_SOURCES="deb file:///mnt/mirror/debian sid main contrib non-free"
 
-# Version number of ISO (limited to 5 chars!):
+# Version number of ISO:
 VERSION="0.0-1"
 
-# Name of the release (limited to 30 chars!):
+# Name of the release:
 RELEASENAME="grml-live just rocks!"
 
 # Specify hostname of the live-system:

--- a/grml-live	Fri Sep 28 23:04:49 2007 +0200
+++ b/grml-live	Sat Sep 29 11:42:47 2007 +0200
@@ -4,7 +4,7 @@
 # Authors:       grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
 # Bug-Reports:   see http://grml.org/bugs/
 # License:       This file is licensed under the GPL v2 or any later version.
-# Latest change: Fri Sep 21 17:00:20 CEST 2007 [mika]
+# Latest change: Sat Sep 29 10:44:26 CEST 2007 [mika]
 ################################################################################
 
 # read configuration files, set some misc variables {{{
@@ -61,6 +61,7 @@ trap bailout 1 2 3 15
 
 [ -n "$VERSION" ]  || VERSION="0.0.1"
 [ -n "$RELEASENAME" ] || RELEASENAME="grml-live rocks"
+[ -n "$GRML_NAME" ] || GRML_NAME='grml'
 
 [ -n "$LOGDIR" ] || LOGDIR="/var/log/fai/dirinstall/$HOSTNAME"
 [ -d "$LOGDIR" ] || mkdir -p $LOGDIR
@@ -122,17 +123,18 @@ usage()
   echo "
 $PN - build process script for generating a (grml based) Linux Live-ISO
 
-Usage: $PN [-c <classe[s]>] [-i <iso_name> ] [-r <release_name>] \\
-       [-s <suite>] [-t <target_directory>] [-v <version_number>] [-Fvh]
+Usage: $PN [-c <classe[s]>] [-g <grml_name>] [-i <iso_name> ] \\
+                 [-r <release_name>] [-s <suite>] [-t <target_directory>] \\
+                 [-v <version_number>] [-FVh]
 
 Usage examples:
 
     $PN
     $PN -c GRMLBASE,GRML_X,I386 -t /grml/
     $PN -c GRMLBASE,I386 -t /dev/shm/grml
-    $PN -c GRMLBASE,GRML_SMALL,I386
-    $PN -c GRMLBASE,I386 -v -i grml_0.0-1.iso
-    $PN -c GRMLBASE,I386 -s sid
+    $PN -c GRMLBASE,GRML_SMALL,I386 -g grml-small -v 1.0
+    $PN -c GRMLBASE,I386 -i grml_0.0-1.iso
+    $PN -c GRMLBASE,I386 -s sid -V
 
 More details: man grml-live
               /usr/share/doc/grml-live/grml-live.html
@@ -145,9 +147,10 @@ http://grml.org/bugs/
 
 # command line parsing {{{
 
-while getopts "c:i:r:s:t:v:FhV" opt; do
+while getopts "c:g:i:r:s:t:v:FhV" opt; do
   case "$opt" in
     c) CLASSES="$OPTARG" ;;
+    g) GRML_NAME="$OPTARG" ;;
     i) ISO_NAME="$OPTARG" ;;
     r) RELEASENAME="$OPTARG" ;;
     s) SUITE="$OPTARG" ;;
@@ -288,38 +291,40 @@ if [ "$ARCH" = i386 ] || [ "$ARCH" = amd
    else
       # booting stuff:
       mkdir -p "$BUILD_TARGET"/boot/isolinux
+      cp /boot/memtest86+.bin                              "$BUILD_TARGET"/boot/isolinux/memtest
+      cp "$CHROOT_TARGET"/boot/initrd*                     "$BUILD_TARGET"/boot/isolinux/initrd.gz
+      cp "$CHROOT_TARGET"/boot/vmlinuz*                    "$BUILD_TARGET"/boot/isolinux/linux26
+      cp /usr/lib/syslinux/chain.c32                       "$BUILD_TARGET"/boot/isolinux/
+      cp /usr/lib/syslinux/isolinux.bin                    "$BUILD_TARGET"/boot/isolinux/
+      cp /usr/lib/syslinux/memdisk                         "$BUILD_TARGET"/boot/isolinux/
+      cp /usr/lib/syslinux/menu.c32                        "$BUILD_TARGET"/boot/isolinux/
+      cp /usr/share/grml-live/templates/boot/isolinux/*    "$BUILD_TARGET"/boot/isolinux/
+      cp /usr/share/grml-live/templates/boot/isolinux/*    "$BUILD_TARGET"/boot/isolinux/
+      cp -a /usr/share/grml-live/templates/boot/grub       "$BUILD_TARGET"/boot/
+
       [ -d "$BUILD_TARGET"/GRML ] || mkdir "$BUILD_TARGET"/GRML
-      cp /boot/memtest86+.bin                                        "$BUILD_TARGET"/boot/isolinux/memtest
-      cp "$CHROOT_TARGET"/boot/initrd*                               "$BUILD_TARGET"/boot/isolinux/initrd.gz
-      cp "$CHROOT_TARGET"/boot/vmlinuz*                              "$BUILD_TARGET"/boot/isolinux/linux26
-      cp /usr/lib/syslinux/chain.c32                                 "$BUILD_TARGET"/boot/isolinux/
-      cp /usr/lib/syslinux/isolinux.bin                              "$BUILD_TARGET"/boot/isolinux/
-      cp /usr/lib/syslinux/memdisk                                   "$BUILD_TARGET"/boot/isolinux/
-      cp /usr/lib/syslinux/menu.c32                                  "$BUILD_TARGET"/boot/isolinux/
-      cp /usr/share/grml-live/i386_files/boot/isolinux/*             "$BUILD_TARGET"/boot/isolinux/
-      cp /usr/share/grml-live/i386_files/boot/isolinux/*             "$BUILD_TARGET"/boot/isolinux/
-      cp -a /usr/share/grml-live/i386_files/boot/grub                "$BUILD_TARGET"/boot/
+      cp -a /usr/share/grml-live/templates/GRML/* "$BUILD_TARGET"/GRML/
 
       # adjust boot splash information:
       ISO_DATE="$(date +%Y-%m-%d)"
-      VERSION="$(cut_string 5 "$VERSION")" ; VERSION="$(extend_string_end 5 "$VERSION")"
-      RELEASENAME="$(cut_string 30 "$RELEASENAME")" ; RELEASENAME="$(extend_string_end 30 "$RELEASENAME")"
-
-      sed -i "s/%VERSION%/$VERSION/"   "$BUILD_TARGET"/boot/isolinux/boot.msg
-      sed -i "s/%RELEASENAME%/$RELEASENAME/" "$BUILD_TARGET"/boot/isolinux/boot.msg
-      sed -i "s/%DATE%/$ISO_DATE/"     "$BUILD_TARGET"/boot/isolinux/boot.msg
-
-      sed -i "s/%VERSION%/$VERSION/"   "$BUILD_TARGET"/boot/isolinux/boot-beep.msg
-      sed -i "s/%RELEASENAME%/$RELEASENAME/" "$BUILD_TARGET"/boot/isolinux/boot-beep.msg
-      sed -i "s/%DATE%/$ISO_DATE/"     "$BUILD_TARGET"/boot/isolinux/boot-beep.msg
-
-      sed -i "s/%VERSION%/$VERSION/"   "$BUILD_TARGET"/boot/grub/menu.lst
+      RELEASE_INFO="$GRML_NAME $VERSION - Release Codename $RELEASENAME"
+      RELEASE_INFO="$(cut_string 68 "$RELEASE_INFO")"
+      RELEASE_INFO="$(extend_string_end 68 "$RELEASE_INFO")"
+
+      sed -i "s/%RELEASE_INFO%/$GRML_NAME $VERSION - $RELEASENAME/" "$BUILD_TARGET"/GRML/grml-version
+      sed -i "s/%DATE%/$ISO_DATE/"             "$BUILD_TARGET"/GRML/grml-version
+
+      sed -i "s/%RELEASE_INFO%/$RELEASE_INFO/" "$BUILD_TARGET"/boot/isolinux/boot.msg
+      sed -i "s/%DATE%/$ISO_DATE/"             "$BUILD_TARGET"/boot/isolinux/boot.msg
+
+      sed -i "s/%RELEASE_INFO%/$RELEASE_INFO/" "$BUILD_TARGET"/boot/isolinux/boot-beep.msg
+      sed -i "s/%DATE%/$ISO_DATE/"             "$BUILD_TARGET"/boot/isolinux/boot-beep.msg
+
+      sed -i "s/%VERSION%/$VERSION/"           "$BUILD_TARGET"/boot/grub/menu.lst
+      sed -i "s/%GRML_NAME%/$GRML_NAME/"       "$BUILD_TARGET"/boot/grub/menu.lst
 
       # autostart for Windows:
-      cp /usr/share/grml-live/windows/autostart/autorun.bat          "$BUILD_TARGET"/
-      cp /usr/share/grml-live/windows/autostart/autorun.inf          "$BUILD_TARGET"/
-      cp /usr/share/grml-live/windows/autostart/autorun.pif          "$BUILD_TARGET"/
-      cp /usr/share/grml-live/windows/autostart/cdrom.ico            "$BUILD_TARGET"/
+      cp /usr/share/grml-live/templates/windows/autostart/* "$BUILD_TARGET"/
       # windows-binaries:
       if [ -n "$WINDOWS_BINARIES" ] ; then
          if [ -f "$BUILD_TARGET"/windows/putty.exe ] ; then
@@ -354,11 +359,15 @@ else
    log "Finished execution of stage 'squashfs' [$(date)]"
    einfo "Finished execution of stage 'squashfs'" ; eend 0
 fi
+
+# create md5sum file:
+( cd $BUILD_TARGET/GRML &&
+find .. -type f -not -name md5sums -exec md5sum {} \; > md5sums )
 # }}}
 
 # ISO_TARGET - mkisofs {{{
 [ -n "$ISO_TARGET" ] || ISO_TARGET="$TARGET/grml_isos"
-[ -n "$ISO_NAME" ] || ISO_NAME="grml_${VERSION}.iso"
+[ -n "$ISO_NAME" ] || ISO_NAME="$GRML_NAME_${VERSION}.iso"
 
 if [ "$BOOT_METHOD" = "isolinux" ] ; then
    BOOT_FILE="boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat"

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/templates/GRML/LICENSE.txt	Sat Sep 29 11:42:47 2007 +0200
@@ -0,0 +1,356 @@
+==================================================================
+The grml software collection and all included programs that are
+authored by the grml-team, are subject to the terms and conditions
+of the GNU GENERAL PUBLIC LICENSE Version 2 or any later version,
+as quoted herein.
+
+Please note that this license does NOT automatically apply to
+third-party programs included on this CD. Check
+/usr/share/doc/*/copyright* and other supplied license files
+of each software package carefully for more information.
+
+Information regarding the sources of this ISO can be found at
+http://sources.grml.org/
+==================================================================
+
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
+==================================================================

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/templates/GRML/README.txt	Sat Sep 29 11:42:47 2007 +0200
@@ -0,0 +1,27 @@
+Security considerations for grml
+================================
+
+1.) There is no automatic start of external accessible services in Live-CD
+    mode. (sshd is started by default on harddisk installations though.)
+
+2.) There are no default passwords. All accounts are locked by default.
+    Even local logins are not possible (unless you set a password or create
+    new user accounts as root).
+
+3.) Therefore, all local interactive processes are started by init without
+    authorization.
+    Programs that only work for root are usually started using sudo without
+    password. This has the advantage of making faults caused by defective
+    software very unlikely, but does not enhance local security, since it
+    is fairly easy to switch between the "grml" and "root" account. The
+    grml user should never be allowed for external logins (in the case
+    that sshd or similar servers are being launched).
+
+4.) You can create valid passwords using "sudo passwd [username]" from the
+    shell, individually.
+
+GRML squashfs file
+==================
+
+The GRML squashfs file has been moved from /GRML/GRML to
+/live/grml.squashfs due to the use of live-initramfs.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/templates/GRML/grml-cheatcodes.txt	Sat Sep 29 11:42:47 2007 +0200
@@ -0,0 +1,255 @@
+      CHEATCODES AND HINTS FOR GRML
+==============================================================================
+
+These options (can be combined) work from the (isolinux/grub) bootprompt:
+
+grml                                Use default settings (same as just pressing return)
+memtest                             Run Memtest86+ instead of Linux
+fb1280x1024                         Use fixed framebuffer graphics (1)
+fb1024x768                          Use fixed framebuffer graphics (2) [notice: grml's default]
+fb800x600                           Use fixed framebuffer graphics (3)
+nofb                                Disable framebuffer
+floppy                              Boot from floppydisk
+hd / hd1 / hd2 / hd3                Boot from (local) primary / secondary /... harddisk
+failsafe                            Boot with (almost) no HW-detection
+debug                               Get shells during process of booting for debugging
+bootchart                           Create chart of booting sequence in /var/log/bootchart.tgz
+forensic                            Do not touch any harddisks during hardware recognition
+splash                              Text based bootsplash
+serial                              Activate ttyS0 and start mgetty
+dos                                 Boot FreeDOS
+grub                                Boot into the Grub bootloader
+qemu                                Boot with special options for use in Qemu
+vmware                              Boot with special options for use in VMware
+
+Important: if you notice any problems with one of the
+following options please report it to the grml-team:
+http://grml.org/bugs/
+
+Notice: not all of the following cheatcodes are available on all the grml flavours.
+For example the X window system is not part of grml-small.
+
+Regional settings:
+------------------
+grml lang=at|de|cn|da|es|fr|it      Specify language ($LANG, $LC_ALL, $LANGUAGE - utf8) + keyboard
+grml lang=nl|pl|ru|sk|tr|tw|us      Specify language ($LANG, $LC_ALL, $LANGUAGE - utf8) + keyboard
+grml lang=$LANG-iso                 Activate $LANG (use like in lines above) with iso-mode instead of utf8
+grml gmt                            Use GMT-based time
+grml tz=Europe/Vienna               Use this timezone for TZ
+grml keyboard=us xkeyboard=us       Use different keyboard layout (text-console/X)
+grml setkeycodes                    Set some special function keys for MS/HP keyboards
+
+Configuration settings:
+-----------------------
+grml myconfig=/dev/fd0              Execute "grml.sh" and extract config.tbz from a partition:
+                                    /dev/fd0  for floppy disk
+                                    /dev/sda1 for USB-stick/first SCSI-device
+grml netconfig=server/config.tbz    Download file and extract configuration archive
+grml partconf=/dev/hda2             Copy files specified in /etc/grml/partconf from /dev/hda2
+                                    to booting grml system
+grml file=foobar.tbz                Use specified file as name for configuration archive
+                                    instead of the default one (config.tbz)
+grml extract=/etc                   Extract only /etc from configuration archive,
+                                    use it in combination with myconfig or netconfig
+grml home=/dev/hda2                 Mount specified partition as grml homedir
+grml home=/dev/sda1/grml.img        Mount loopback file as /home/grml
+grml home=scan                      Automatic search for grml homedir (using file grml.img)
+grml hostname=...                   Set hostname
+grml debnet                         Search through local partitions for file /etc/network/interfaces,
+                                    copy /etc/network to local system and restart networking then
+grml distri=...                     Set distribution name to given argument. If a jpg file named like the
+                                    given distri name can be found in directory desktop on the ISO
+				    (/cdrom/desktop/"$DISTRI") it will be taken as wallpaper for grml
+grml unionfs                        Use unionfs instead of aufs as overlay filesystem
+
+Notice: Take a look at http://grml.org/config/ and
+/usr/share/doc/grml-saveconfig/grml-config.html
+for more information regarding the configuration
+framework of grml.
+
+Booting related options:
+------------------------
+grml toram                          Copy CD to RAM and run from there
+grml tohd=/dev/hda1                 Copy CD to HD partition and run from there
+grml fromhd                         Skip checking for grml on CD-ROM
+grml fromhd=/dev/hda1               Boot from previously copied CD-Image
+grml bootfrom=/dev/hda1             Access Image then boot from previously
+                                    copied CD-Image
+grml bootfrom=/dev/hda1/GRML.iso    Access image, boot from ISO-Image
+grml grml_dir=GRML                  Directory to search for on the CD
+grml grml_name=GRML                 SquashFS-File to search for on the CD
+
+Debugging related settings:
+---------------------------
+debug                               Get shells during process of booting
+grml nocolor                        Disable colorized output while booting
+grml log                            Log error messages while booting and
+grml testcd                         Check CD data integrity and md5sums
+
+Service related settings:
+-------------------------
+grml ssh=password                   Set password for user grml and start ssh-server
+grml startup=script                 Start $script instead of grml-quickconfig on startup
+grml nosyslog                       Do not start syslog-ng
+grml nogpm                          Disable GPM daemon
+grml noblank                        Disable console blanking
+grml small                          Do not start that many consoles
+grml wondershaper=eth0,1000,500     Set up basic traffic shaping
+grml services={postfix,mysql,...}   Start service(s) which have an init-script (/etc/init.d/)
+grml welcome                        Welcome message via soundoutput
+grml noeject                        Do NOT eject CD after halt/reboot
+grml noprompt                       Do NOT prompt to remove the CD when halting/rebooting the system
+grml distcc=$NETWORK,$INTERFACE     Activate distcc-daemon to listen on specified network
+                                    and interface, usage example:
+                                    distcc=192.168.0.1/24,eth0
+grml gcc=3.4 gpp=3.4                Link /usr/bin/gcc, /usr/bin/cpp and /usr/bin/c++ to specified version
+grml startx{=windowmanager}         Start X window system automatically
+                                    Default window manager (if not provided): wm-ng (wrapper around fluxbox)
+
+Accessibility related settings:
+-------------------------------
+grml blind                          Start Braille-Terminal (no X)
+grml swspeak                        Prepare system for use with software synthesizer through speakup
+                                    Run 'swspeak' after booting up to activate sound output
+grml brltty=type,port,table         Parameters for Braille device (e.g.: brltty=al,/dev/ttyS0,text.de.tbl)
+grml speakup_synth=...              Use speakup kernel module with given hardware type
+
+Hardware related settings:
+--------------------------
+grml swap                           Activate present/detected swap partitions
+grml noswraid                       Disable scanning for software raid arrays (creates /etc/mdadm/mdadm.conf)
+grml swraid                         Enable automatic assembling of software raid arrays
+grml nolvm                          Disable scanning for Logical Volumes (LVM)
+grml lvm                            Automatically activate Logival Volumes (LVM) during boot
+grml scandelay[=seconds]            Delay accessing ISO-device (useful for booting via usb/firewire)
+grml cdrom=/dev/...                 Use specifed device as CD-ROM device (used for mounting the grml-ISO)
+grml xmodule=ati|fbdev|i810|mga     Use specified X.org-Module (1)
+grml xmodule=nv|radeon|savage|s3    Use specified X.org-Module (2)
+grml xmodule=radeon|svga|i810       Use specified X.org-Module (3)
+grml no{acpi,agp,apm,cpu,dhcp}      Skip parts of HW-detection (1)
+grml no{dma,fstab,modem}            Skip parts of HW-detection (2)
+grml no{pcmcia,scsi,swap,usb}       Skip parts of HW-detection (3)
+grml 915resolution=...              Start resolution modify tool for Intel graphic chipset
+                                    usage: $MODE,$XRESO,$YRESO
+grml blacklist=modulename           Completely disable loading of specified module via
+                                    blacklisting through /etc/modprobe.d/grml
+grml fwtimeout=50                   Set firmware timeout via /sys/class/firmware/timeout to specified value
+grml nosound                        Mute sound devices (notice: this does not deactivate loading of sound drivers!)
+grml vol=number                     Set mixer volumes to level $number
+grml pnpbios=off                    No PnP Bios initialization
+grml acpi=off                       Disable ACPI Bios completely
+grml nousb2                         Disable initialization of USB 2.x controller(s)
+grml nousb                          Disable initialization of USB in booting sequence
+grml nofirewire                     Disable initialization of firewire devices in booting sequence
+grml pci=irqmask=0x0e98             Try this, if PS/2 mouse doesn't work *)
+grml pci=bios                       Workaround for bad PCI controllers
+grml ide2=0x180 nopcmcia            Boot from PCMCIA-CD-ROM (some notebooks)
+grml mem=128M                       Specify Memory size in MByte
+grml dma                            Enable DMA accelleration for ALL IDE-Drives
+grml nodma ide=nodma                Disable DMA accelleration for ALL IDE-Drives
+grml vga=normal [video=ofonly]      No-framebuffer mode (does not influence X)
+grml vga=ask [video=ofonly]         Display menu for framebuffer mode
+
+Installation related settings:
+------------------------------
+
+Caution: do *not* use the grml2hd and/or debian2hd bootoption if you do not know what you are doing!
+
+Install plain Debian via debian2hd bootoption (which runs grml-debootstrap in non-interactive mode):
+
+debian2hd <options>                 ... whereas valid options for debian2hd are:
+
+  target=       target partition/directory of the new Debian system, e.g.: target=/dev/hda1
+  grub=         where to install grub to? Use grub syntax for specifying, e.g.: grub=hd0
+  groot=        specify root device for usage in grub (use grub syntax), e.g.: groot=hd0,0
+  release=      specify release of new Debian system (default is stable), e.g.: release=sid
+  mirror=       specify mirror for apt-get/aptitude, e,g.: mirror=ftp://ftp.tugraz.at/mirror/debian
+  password=     set passwort of user root without prompting for it, e.g.: password=AiTh5ahn
+
+  Usage example for automatic installation:
+    debian2hd target=/dev/hda1 grub=hd0 groot=hd0,0 mirror=ftp://ftp.tugraz.at/mirror/debian password=foobar
+
+  See http://grml.org/grml-debootstrap/ for more information.
+
+Install grml via grml2hd bootoption (which runs grml2hd in non-interactive mode):
+
+grml2hd <options>                   ... whereas valid options for grml2hd are:
+
+   user=                user name for user which should be used at hd-install
+   filesystem={ext2|ext3|reiserfs|reiser4|jfs|xfs}      filesystem to be used
+   mbr=/dev/...  partition where MBR should be installed (default:=partition)
+   partition=/dev/...                partition where grml should be installed
+
+  Usage example for booting:
+   grml2hd partition=/dev/hda4 mbr=/dev/hda filesystem=ext3 user=mika
+
+  Passwords of user root and user are "grml" - please adjust after hd-install!
+
+  See http://grml.org/grml2hd/ for more information.
+
+Additional notes:
+-----------------
+
+*) Try "grml pci=irqmask=0x0e98" if (you have a notebook and) your
+PS/2 mouse doesn't work. (Possibly caused by a BIOS-flaw on your board,
+BIOS updates can help.) Sometimes, switching to the text console with
+Control-Alt-F1 and back to the X-screen with Control-Alt-F7 solves the
+problem without rebooting, since the X server reinitializes the mouse
+driver during that procedure.
+
+*) Bootfrom needs access to a running grml-System with the same Kernel
+as the Bootkernel, before it is able to mount the partition / ISO-Image.
+This should allow a poor mans install from NTFS-Partitions and makes it
+also possible to boot an ISO-Image directly. You can also use wildcards
+in the ISO-Filename, but it must be unique. So: If you have just one
+grml.iso on /dev/hda1 you can access it as: bootfrom=/dev/hda1/G*.iso,
+but if there are several, you need to make clear, which one you want.
+(Feature added by Fabian Franz.)
+
+*) If your grml-CD makes strange noises during boot, or you see frequent
+errors like "squashfs: read error", or programs are crashing randomly,
+then your CD image is probably defective or incomplete, or your CD-burner
+created a defective CD due to wrong writing speed or bad media. This is
+the most common error reported.  Please boot with "grml testcd" to check
+if the CD is OK, and/or even better, verify the MD5 checksums that are
+present on the mirrors before writing the CD.  Check your CD low-level
+via running 'readcd -c2scan dev=/dev/cdrom'. In some cases, defective
+IDE controllers cause this error if you have DMA enabled. Also, please
+read the grml-FAQ.
+
+*) In case of a failing hardware autodetection, try booting with any of
+the "no-" options as shown in the table above, like in
+   grml noagp noapm noapic acpi=off nodma
+to skip some critical parts of the autodetection system.
+
+*) Some boards apparently don't pass the proper memory size to the
+linux-kernel. It may cause the message "Panic: cannot mount root file
+system" and the system hangs. Use "grml mem=128M" to solve that
+problem if your system has 128MByte memory for example (caution:
+you MUST use a capital "M" here).
+
+*) The "myconfig=/dev/partition" option allows you to reconfigure the
+system after autoconfiguration by running a bourne shell script called
+"grml.sh" and/or extracting configuration files from a file named
+config.tbz from the root directory on the given device (or floppy).
+Take a look at http://grml.org/config/ for more information regarding
+the configuration framework of grml.
+
+*) If you wish to remaster the CD, please don't forget to specify
+
+        -no-emul-boot -boot-load-size 4 -boot-info-table \
+        -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat
+
+as option to mkisofs. Otherwise your CD won't be bootable. The
+directory GRML, containig the compressed filesystem file "GRML",
+must be located in the top level directory of the CD.
+
+*) Caution: screensavers: Don't start xlock/vlock or any other screensaver
+that requires a password. There are no default passwords on grml,
+i.e. all accounts are LOCKED unless you explicitly set a password.
+See also README_Security.txt about this issue.
+Hint: If you accidentially started a screensaver switch to one of the
+textconsoles by Control-Alt-F1 and kill the screensaver (or just set a
+password for the grml user). Take a look at the script grml-lock.
+
+# EOF

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/templates/GRML/grml-version	Sat Sep 29 11:42:47 2007 +0200
@@ -0,0 +1,1 @@
+%RELEASE_INFO% [%DATE%]

Binary file templates/GRML/images/button.png has changed

Binary file templates/GRML/images/favicon.png has changed

Binary file templates/GRML/images/linux.jpg has changed

Binary file templates/GRML/images/logo.png has changed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/templates/GRML/index.html	Sat Sep 29 11:42:47 2007 +0200
@@ -0,0 +1,157 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+<head>
+<title>grml.org - Linux Live-CD for sysadmins and texttool-users</title>
+<link rel="home" href="http://grml.org/" title="grml.org" />
+<link rel="icon" href="images/favicon.png" type="image/png" />
+<meta http-equiv="content-Type" content="application/xhtml+xml; charset=iso-8859-1" />
+<style type="text/css">
+   @import url("style.css");
+</style>
+</head>
+
+<body>
+<div class="container">
+      <div class="menu">
+            <h1><a class="plain" href="http://grml.org/"><img style="border: 0" alt="grml.org" src="images/logo.png" /></a></h1>
+            <h3><a class="plain">Online-Links:</h3>
+            <h3><a class="plain" href="http://grml.org/">HOME</a></h3>
+            <h3>About</h3>
+              <p>
+                <a class="plain" href="http://grml.org/features/">Features</a><br/>
+                <a class="plain" href="http://grml.org/team/">Team</a><br/>
+                <a class="plain" href="http://grml.org/roadmap/">Roadmap</a><br/>
+                <a class="plain" href="http://grml.org/screenshots/">Screenshots</a><br/>
+              </p>
+            <h3>News</h3>
+              <p>
+                <a class="plain" href="http://grml.org/news/">News</a><br/>
+                <a class="plain" href="http://grml.org/press/">Press</a><br/>
+                <a class="plain" href="http://grml.org/index.rss" title="subscribe RSS-feed"><abbr title="format for syndicating news">RSS-Feed</abbr></a>
+                <a class="plain" href="http://grml.org/index.rss"><span style="font-family: verdana, sans-serif; font-size: 70%;
+                font-weight: bold; text-decoration: none; color: #8B8D7B; background-color: #FFDA62;
+                border: 1px solid; border-color: #8B8D7B #8B8D7B #8B8D7B #8B8D7B; padding:0px 3px 0px 3px;
+                margin: 0px;">RSS</span></a><br/>
+              </p>
+            <h3>Getting grml</h3>
+              <p>
+                <a class="plain" href="http://grml.org/download/">Download</a><br />
+                <a class="plain" href="http://grml.org/order/">Order</a><br />
+                <a class="plain" href="http://grml.org/files/">Files</a><br />
+              </p>
+            <h3>Documentation</h3>
+              <p>
+                <a class="plain" href="http://grml.org/docs/">Documentation</a><br/>
+                <a class="plain" href="http://grml.org/faq/"><abbr title="Frequently Asked Questions">FAQ</abbr></a><br/>
+                <a class="plain" href="http://wiki.grml.org/">Wiki</a><br/>
+                <a class="plain" href="http://grml.org/books/">Books</a><br/>
+                <a class="plain" href="http://grml.org/kernel/">Kernel</a><br/>
+                <a class="plain" href="http://grml.org/zsh/">Zsh</a><br/>
+              </p>
+            <h3>Development</h3>
+              <p>
+                <a class="plain" href="http://grml.org/bugs/">Bugs</a><br/>
+                <a class="plain" href="http://solutions.grml.org/">grml-Solutions</a><br/>
+                <a class="plain" href="http://grml.org/beta-tester/">Beta-Tester</a><br/>
+                <a class="plain" href="http://grml.supersized.org/">Devel Blog</a><br/>
+              </p>
+            <h3>Communication</h3>
+              <p>
+                <a class="plain" href="http://grml.org/mailinglist/">Mailinglist</a><br/>
+                <a class="plain" href="http://grml.org/irc/">IRC</a><br/>
+                <a class="plain" href="http://grml.org/report/">Report wishes</a><br/>
+                <a class="plain" href="http://grml.org/contact/">Contact</a><br/>
+              </p>
+
+            <h3>Search for:</h3>
+              <form method="get" action="http://grml.org/cgi-bin/search.pl">
+               <fieldset style="border: 0px">
+                <input name="Terms" size="13" />
+                <input type="submit" value="Search" />
+               </fieldset>
+              </form>
+
+            <h3><a class="plain" href="http://grml.org/sitemap/">Sitemap</a></h3>
+
+